Swimming Pool Winterizations

• The swimming pool is spot cleaned and balanced for closing.
• Water is pumped down below the returns.
• All water flow directional inlets are removed and stored onsite for the winter.
• All filtration and skimmer baskets are removed and stored onsite for the winter.
• All water lines are air compressed to remove water from the lines.
• Skimmer lines, return lines and fill lines are pumped with anti freeze to prevent freeze damage.
• Return lines and skimmer lines are plugged to prevent any water from entering the lines.
• All deck equipment including ladders, handrails, diving boards, light fixtures, and automatic cleaning devices are removed and stored onsite for the winter.
• The winter cover and water tubes are positioned on and around the pool.
• The safety cover is installed (if applicable).
• Operational filtration equipment that needs to be disconnected is disconnected. 
• All equipment drain plugs are removed and stored onsite to prevent freeze damage to the equipment.
• Customer's cleaning equipment such as telepoles, nets or brushes are neatly stacked on the pool deck for winter storage.
• A complete inspection is done of the pump, motor, filter, heater, automatic chemical feeder, automatic pool cleaner, automated controller systems, tile, coping stones and the pool deck.
• A detailed closing checklist is left behind onsite for the customer detailed checklist shows work preformed and also list possible concerns or repairs needed or suggested).